Users Guide

Example
OS10(config)# lacp system-priority 32768
Supported
Releases
10.2.0E or later
show lacp counter
Displays information about LACP statistics.
Syntax
show lacp counter [interface port-channel channel-number]
Parameters
• interface port channel — (Optional) Enter the interface port-channel.
• channel-number — (Optional) Enter the LACP channel group number (1 to 128).
Default Not configured
Command Mode EXEC
Usage Information If you do not enter the channel-number parameter, all channel groups display.
Example
OS10# show lacp counter interface port-channel 1
LACPDUs Marker Marker Response LACPDUs
Port Sent Recv Sent Recv Sent Recv Pkts Err
----------------------------------------------------------------
port-channel1
Ethernet1/1 554 536 0 0 0 0 0
Ethernet1/2 527 514 0 0 0 0 0
Ethernet1/3 535 520 0 0 0 0 0
Ethernet1/4 515 502 0 0 0 0 0
Ethernet1/5 518 505 0 0 0 0 0
Ethernet1/6 540 529 0 0 0 0 0
Ethernet1/7 541 530 0 0 0 0 0
Ethernet1/8 547 532 0 0 0 0 0
Ethernet1/9 544 532 0 0 0 0 0
Ethernet1/10 513 501 0 0 0 0 0
Ethernet1/11 497 485 0 0 0 0 0
Ethernet1/12 493 486 0 0 0 0 0
Ethernet1/13 492 485 0 0 0 0 0
--more--
Supported
Releases
10.2.0E or later
show lacp interface
Displays information about specific LACP interfaces.
Syntax
show lacp interface ethernet node/slot/port
Parameters node/slot/port — Enter the interface information.
Default Not configured
Command Mode EXEC
Usage Information The LACP_activity field displays if you configure the link in Active or Passive port channel mode. The Port
Identifier field displays the port priority as part of the information including the port number. For example, Port
Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port number value is 0x101.
Example
OS10# show lacp interface ethernet 1/1/129
Invalid Port id, Max. Port Id is: 32
OS10# show lacp interface ethernet 1/1/29
Interface ethernet1/1/29 is up
Channel group is 1 port-channel is po1
PDUS sent: 365
384 Layer 2