Users Guide

Change history
The following table provides an overview of the changes to this guide from a previous OS10 release to 10.5.0.3 release. For more
information about the new features, see the respective sections.
Table 1. New in 10.5.0.3
Revision Date Feature Description
A03 2019–12-06
Enable SmartFabric Services on the
switches
Enable or disable SmartFabric Services in an OS10 switch using
OS10 CLI.
SmartFabric Services Graphical User
Interface
Facilitates day zero deployment configurations and management
of the switches in a Layer 3 fabric formed in leaf and spine
topology.
Disable announcements of ASN values
Configure the system to modify the AS_PATH attribute of the
received BGP routes and disable prepending the globally
configured AS number.
Table 2. New in 10.5.0.1P1
Revision Date Feature Description
A02 2019–10-07 Priority flow control • Configure the traffic-class to queue mapping for the
Z9332F-ON.
• View the format of the default traffic-class to queue
mapping.
queue qos-group (Z9332F-ON) Configure the mapping of different traffic types of traffic classes
to different queues.
show qos maps (Z9332F-ON) Displays the QoS maps configuration of dot1p-to-traffic class,
DSCP-to-traffic class, and traffic-class to queue mapping in the
device.
Table 3. New in 10.5.0.1
Revision Date Feature Description
A01 2019–09-17 MX Ethernet IO modules replacement
in SmartFabric
Replace an Ethernet I/O module (IOM) that is part of a
SmartFabric.
SmartFabric Services mode CLI
support:
• NTP
• SupportAssist
• Logging
• System Clock
• Security
• F_Port commands
Configure the following protocols or services using the
SmartFabric OS10 CLI:
• NTP
• SupportAssist
• Logging
• SNMP
• System Clock
• Security
• FC Zone
SmartFabric Services show
commands
View SmartFabric-related configuration information using show
commands.
1
28 Change history