Users Guide

• vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to configure the non-default
VRF instance used to reach the Telnet server.
Default The Telnet server is reachable on the default VRF.
Command Mode CONFIGURATION
Usage Information By default, the Telnet server is disabled. To enable the Telnet server, use the telnet enable command.
Example
OS10(config)# ip telnet server vrf management
OS10(config)# ip telnet server vrf vrf-blue
Supported
Releases
10.4.0E(R1) or later
Simple Network Management Protocol
Network management stations use simple network management protocol (SNMP) to retrieve and modify software configurations for
managed objects on an agent in network devices. A managed object is a datum of management information.
The SNMP agent in a managed device maintains the data for managed objects in management information bases (MIBs). Managed
objects are identified by their object identifiers (OIDs). A remote SNMP agent performs an SNMP walk on the OIDs stored in MIBs on the
local switch to view and retrieve information.
OS10 supports standard and private SNMP MIBs, including all get requests. MIBs are hierarchically structured and use object identifiers
to access managed objects. For a list of MIBs supported in the OS10 version running on a switch, see the OS10 Release Notes for the
release.
OS10 supports different security models and levels in SNMP communication between SNMP managers and agents. Each security model
refers to an SNMP version used in SNMP messages. SNMP versions provide different levels of security, such as user authentication and
message encryption.
SNMP security models and levels
OS10 supports SNMP security models v1, v2c, and v3. The supported security levels are no authentication, authentication, and privacy.
You specify the SNMP security model and level when you configure SNMP groups and users. Each security model corresponds to an
SNMP version that provides different security levels:
• SNMPv1 provides no user authentication or privacy protection (encryption). SNMP messages are sent in plain text.
• SNMPv2c provides no user authentication or encryption. SNMP messages are sent in plain text.
• SNMPv3 provides user-configured security levels for user authentication and encryption of SNMP messages:
• No user password or message encryption
• User authentication only
• User authentication and message encryption
MIBs
OS10 supports the following standard and Dell EMC enterprise MIBs.
MIBs are stored in the /opt/dell/os10/snmp/mibs/ directory.
Table 17. Standards MIBs
Module Standard
BRIDGE-MIB IEEE 802.1D
ENTITY-MIB RFC 6933
EtherLike-MIB RFC 3635
HOST-RESOURCES-MIB RFC 2790
IEEE8021-PFC-MIB IEEE 802.1Qbb
136 System management