Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsEMC Networking MX9116n
1151115211531154115511561157115811591160
Table Of Contents
show qos port-map details
Displays port to port pipe and MMU mapping.
Syntax
show qos port-map details [interface interface-type]
Parameters interface interface-type — (Optional) Enter the keyword interface and the interface type.
Default Not configured
Command Mode EXEC
Usage Information
On the Z9100–ON, Z9264F–ON, and MX9116n platforms, interfaces are shared across port pipes and port pipes
are shared across Memory Management Units (MMUs). As interfaces span port pipes, Dell EMC Networking
recommends using interfaces from same port pipes for both ingress and egress for optimal performance. To find
the port to port-pipe and MMU mapping, use the
show qos port-map details command.
Example
Z9100–ON switch:
OS10# show qos port-map details
---------------------------------------------------------------------------
Interface Port Pipe Ingress MMU Egress MMU Oper Status
---------------------------------------------------------------------------
Eth 1/1/1 1 2, 3 0, 2 up
Eth 1/1/2 1 2, 3 0, 2 up
Eth 1/1/3 1 2, 3 0, 2 up
Eth 1/1/4 1 2, 3 0, 2 up
Eth 1/1/5 2 2, 3 1, 3 up
Eth 1/1/6 2 2, 3 1, 3 up
Eth 1/1/7 2 2, 3 1, 3 up
Eth 1/1/8 2 2, 3 1, 3 up
Eth 1/1/9 1 2, 3 0, 2 up
Eth 1/1/10 1 2, 3 0, 2 up
Eth 1/1/11 1 2, 3 0, 2 up
Eth 1/1/12 1 2, 3 0, 2 up
Eth 1/1/13 2 2, 3 1, 3 down
Eth 1/1/14 2 2, 3 1, 3 down
Eth 1/1/15 2 2, 3 1, 3 down
Eth 1/1/16 2 2, 3 1, 3 down
Eth 1/1/17 3 0, 1 1, 3 down
Eth 1/1/18 3 0, 1 1, 3 down
Eth 1/1/19 3 0, 1 1, 3 down
Eth 1/1/20 3 0, 1 1, 3 down
Eth 1/1/21 0 0, 1 0, 2 down
Eth 1/1/22 0 0, 1 0, 2 down
Quality of service
1159