Users Guide

Supported
Releases
10.3.0E or later
show ipv6 ospf
Displays OSPFv3 instance configuration information.
Syntax
show ipv6 ospf [instance-number]
Parameters instance-number — (Optional) View OSPFv3 information for a specified instance number, from 1 to
65535.
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show ipv6 ospf
Routing Process ospfv3 200 with ID 1.1.1.1
It is an Area Border Router
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 2, normal 2 stub 0 nssa
Area (0.0.0.0)
Number of interface in this area is 1
SPF algorithm executed 42 times
Area (0.0.0.1)
Number of interface in this area is 1
SPF algorithm executed 42 times
OS10# show ipv6 ospf 200
Routing Process ospfv3 200 with ID 10.0.0.2
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 1, normal 1 stub 0 nssa
Area (0.0.0.0)
Number of interface in this area is 1
SPF algorithm executed 3 times
Supported
Releases
10.3.0E or later
show ipv6 ospf database
Displays all LSA information. You must enable OSPFv3 to generate output.
Syntax
show ipv6 ospf process-id [vrf vrf-name] database
Parameters
● process-id — Enter the OSPFv3 process ID to view a specific process. If you do not enter a
process ID, the command applies to all the configured OSPFv3 processes.
● vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to display LSA
information for that VRF.
Default Not configured
Command Mode EXEC
Usage
Information
● Link ID—Identifies the router ID.
● ADV Router—Identifies the advertising router’s ID.
● Age—Displays the LS age.
● Seq#—Identifies the LS sequence number. This identifies old or duplicate LSAs.
● Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
● Link count—Displays the number of interfaces for that router.
Layer 3 791