Install Guide
Technical specications
This section highlights the features and specications for the Dell EMC MXG610s 32 Gbps FC switch module.
System specications
Table 6. System specications
System components Description
Enclosure Less than 1U module—2.75 cm / 1.08 inches
Power inlet Internal to the chassis
Power supplies
12 V power supply from the Dell EMC PowerEdge MX7000 chassis
3.3 V standby power supply derived from 12 V source on the switch
module
Maximum power—150 Watts
Fans Internal to the chassis
Cooling Integrated system cooling; back-to-front port-side exhaust
System architecture Nonblocking shared memory switch
System processors Freescale PowerPC T1022E with two cores at 1.2 GHz
Table 7. Fibre Channel specications
System components Description
Fibre Channel ports Default switch mode
• 16 external ports supporting 8 Gbps, 16 Gbps, and 32 Gbps
speeds using eight SFPs and two QSFPs
• 16 internal ports supporting 16 Gbps and 32 Gbps speeds
ANSI Fibre Channel protocol Fibre Channel Physical and Signaling Interface standard—FC-PH
Modes of operation Fibre Channel Class 2, Class 3, and Class F
Fabric initialization Complies with FC-SW-5
FCIP—IP over Fibre Channel Complies with FC-IP 2.3 of FCA prole
Port status Bicolor LED—amber/green
8
34 Technical specications