Install Guide
Table Of Contents
- MXG610s Fibre Channel Switch Module Installation Guide May 2021
- Contents
- About this guide
- Switch module overview
- Installation preparation
- Switch module installation overview
- Transceiver and cable installation
- Switch module monitoring
- Initial setup and verification
- Technical specifications
- Regulatory statements
- Caution and danger notices
- Dell EMC support
Europe and Australia CISPR 32 Class A Warning
This product is a Class A. In a domestic environment this product may cause radio interference. You may be required to take
adequate measures.
US only FCC warning
This equipment has been tested and complies with the limits for a Class A computing device pursuant to Part 15 of the FCC
Rules. These limits provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, might cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference, in which case you are required to correct the interference at the user’s own expense.
Germany statement
Machine noise information regulation—3. GPSGV, the highest sound pressure level value is 48.5 dB(A) in accordance with EN
ISO 7779.
Maschinenlärminformations-Verordnung—3. GPSGV, der höchste Schalldruckpegel beträgt 48.5 dB(A) gemäss EN ISO 7779.
Republic of Korea KCC statement
Class A device, Broadcasting Communication Device for Office Use: This device obtained EMC registration for office use, Class
A, and may be used in places other than home. Sellers and/or users need to take note of this.
38
Regulatory statements