Install Guide
Table Of Contents
- MXG610s Fibre Channel Switch Module Installation Guide May 2021
- Contents
- About this guide
- Switch module overview
- Installation preparation
- Switch module installation overview
- Transceiver and cable installation
- Switch module monitoring
- Initial setup and verification
- Technical specifications
- Regulatory statements
- Caution and danger notices
- Dell EMC support
Table 16. Fibre Channel data port specifications
Port numbers Media type Description
0, and 17 through 23 8-, 16- or 32-Gbps SFP+ ports Compatible with SWL and LWL
transceivers. Can be F_Port, N_Port, or
E_Port
24 through 31 4x16- or 4x32-Gbps QSFP ports Compatible with SWL and LWL
transceivers. Can be F_Port, N_Port, or
E_Port
Table 17. Fibre Channel data transmission ranges
Port speed (Gbps) Cable size (microns) Short wavelength
(SWL)
Long wavelength
(LWL)
Extended long
wavelength (ELWL)
8 50
50 m (164 ft) (OM2)
150 m (492 ft) (OM3)
190 m (623 ft) (OM4)
N/A N/A
62.5 21 m (69 ft) N/A N/A
9 N/A 10 km (6.2 miles) 25 km (15.5 miles)
16 50
35 m (115 ft) (OM2)
100 m (328 ft) (OM3)
125 m (410 ft) (OM4
N/A N/A
62.5 15 m (49 ft) N/A N/A
9 N/A 10 km (6.2 miles) 25 km (15.5 miles)
32 50
70 m (230 ft) (OM3)
100 m (328 ft) (OM4)
N/A N/A
62.5 N/A N/A N/A
9 N/A 10 km (6.2 miles) 25 km (15.5 miles)
Table 18. Serial port, Micro-USB specifications
Pin Signal Description
1 VCC +5 VDC
2 D- Data -
3 D+ Data +
4 ID USB OTG ID
5 GND Ground
Table 19. Serial port, protocol specifications
Parameter Value
Baud 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
Technical specifications 33