Install Guide

Table 12. LEDs
System components Description
Module power and status LED One bicolor I/O module power and status LED at the right;
upper side.
Module identification LED One blue I/O module identification LED at the right; lower
side.
FC port status and fault LEDs
One bicolor port status; green/amber, LED above each SFP+
FC port.
Four bicolor port status; green/amber, LED above each QSFP
port.
Table 13. Weight and physical dimension
Height Width Depth Weight—empty Weight—fully loaded
.75 cm
1.08 in
21.45 cm
8.44 in
24.10 cm
9.49 in
1.35 kg
2.98 lb
1.61 kg
3.55 lb
Table 14. Environmental requirements
Condition Operational Storage
Ambient temperature -5°C to 50°C (23°F to 122°F) -40°C to 70°C (-40°F to 158°F)
Relative humidity, noncondensing 5% to 95% 5% to 95% (Non-condensing)
Altitude, above sea level Up to 3200 m (10,000 feet) 0 to 12192 m (40,000 feet)
Shock 10.0 G for 11 ms, half-sine wave
Half Sine Shock: 105 G for 2ms
Square Wave Shock: 32 G with velocity
change of 270 in/sec squared
Trapezoidal wave shock: 70 G for 12ms
Vibration
Random Vibration: 0.4 Grms at 5-500 Hz
for 60 minutes/axis
Sine Vibration: 1G at 5-500-5 Hz for 15
minutes/axis
Random Vibration:1.88 Grms at 10-500
Hz for 15 minutes/axis
Sine Vibration:2.4 Grms at 5.9-500 Hz
for 15 minutes/axis
Airflow Maximum: 10.0 cfm N/A
Heat dissipation Refer to the Power consumption
sections.
N/A
Operating noise N/A N/A
Table 15. Power consumption per module
Module name Power consumption
MXG610s FC switch module
12 V power supply from the Dell EMC PowerEdge MX7000
chassis
Idle: 50 Watts @ 25°C
Mini-Cycle: 57 Watts @ 25°C
Maximum: 60 Watts @ 25°C
32 Technical specifications