Install Guide

8 8 460800 -- N32 No_Module FC
9 9 460900 -- N32 No_Module FC
10 10 460a00 -- N32 No_Module FC
11 11 460b00 -- N32 No_Module FC
12 12 460c00 -- N32 No_Module FC
13 13 460d00 -- N32 No_Module FC
14 14 460e00 -- N32 No_Module FC
15 15 460f00 -- N32 No_Module FC
16 16 461000 -- N32 No_Module FC
17 17 461100 -- N32 No_Module FC
18 18 461200 -- N32 No_Module FC
19 19 461300 -- N32 No_Module FC
20 20 461400 -- N32 No_Module FC
21 21 461500 -- N32 No_Module FC
22 22 461600 -- N32 No_Module FC
23 23 461700 -- N32 No_Module FC
<Output truncated>
Configuration backup
Always keep a backup copy of your configuration files. You can use these backup files to restore your configuration when
needed. Dell EMC recommends backing up the configuration regularly to ensure that a complete configuration is available for
downloading.
The following recommendations apply:
● Keep backup copies of the startup configuration for all switches in the fabric.
● Upload the configuration backup copies to an external host or an attached USB device.
● Avoid copying configuration files from one switch to another. Instead, restore the switch configuration files from the backup
copy.
Backup procedure
To back up the switch module configuration to an FTP server:
1. Open an SSH session to the serial console.
2. Enter the configUpload command.
You are presented with a series of prompts.
3. Follow the prompts to upload the configuration.
The configUpload command uploads the switch configuration to the server, making it available for downloading to a
replacement switch module, if required.
Initial setup and verification
29