Setup Guide

Systems - Reference 35
Discovery / Inventory Wizard
Provide these values to set IP range and host information.
Communication Settings
Optimal parameter values depend on the characteristics of a network. In
communication settings, you can provide credentials, Ping (ICMP) Settings,
and WS-Man Settings.
Status The license status:
• Green—The license is ok.
• Yellow—The license has a potential problem.
• Red—License is not functional.
Description The license description.
Entitlement ID The unique license identifier.
Expiration The license expiration date, if applicable.
Term The license terms.
Inventory Click the check box to select the IP address.
Range / Address Name Enter a unique name describing the range.
Start / Individual
Address
Enter the IPv4 address beginning the range or the
individual IP address.
End Address Enter the IPv4 address ending the range.
Subnet Mask (Optional) Use subnet mask to exclude network and
broadcast addresses from inventory attempts. If omitted,
each address is treated as a host.
Description (Optional) You can enter a description. Each inventory
range can include at most a Class B network (65,536
addresses).
Credentials You must specify the credentials to conduct discovery
inventory. Credential information is not persistent across
task executions.
dlm.book Page 35 Wednesday, November 16, 2011 9:09 AM