Users Guide

8. On the Confirm Settings page of the Discovery / Inventory Wizard:
● Review the discovery settings you provided. Click Back to edit the settings.
● If you do not want to view the inventory task progress in the task pane, clear the Show task pane after launch check
box.
9. Click Run Discovery / Inventory.
The Tasks view is displayed. You can go to the Systems view to see the inventoried systems.
NOTE: If you have cleared the Show task pane after launch check box in step 8, the Systems view is displayed.
Editing an inventory range
Specify the management controller IP addresses in the appropriate discovery or inventory tables. License Manager cannot
inventory the license information from the operating systems or hypervisors on which it is installed.
To edit a range:
NOTE: To remove a range from License Manager, select the entry in the table and click Remove Selected.
1. Click Run Discovery and Inventory.
2. Select the entry in the table and click Edit.
The Edit Inventory Range window is displayed.
3. Edit the IP range or address name, IPv4 range, or individual address (IPv4, IPv6, or hostname) based on your preference.
4. Click OK.
Viewing inventoried systems
To view inventoried systems, select Systems. Inventoried systems are listed in the Systems view. The System Inventory table
provides a summary of the inventoried systems and the System Details pane provides more information about a selected
system.
NOTE: For PowerEdge storage sleds, License Manager displays the license level of the host CMC as the current license.
Removing system information
1. In Systems, select the systems you want to remove and click Delete.
2. When prompted, click Yes to confirm.
Saving reports
You can save system information into reports in the CSV, XML, or HTML formats.
1. From Systems, click Save Report.
2. Specify the folder location and file name.
3. In Save as type, select the report format, and then click Save.
4. Click OK.
Working with licensable systems
15