Users Guide

Power management
Item Default value
AC Recovery (Desktop) — [Power Off/Power On/Last Power
State]
Last Power State
Auto On Time
Time Selection HH/MM [AM/PM] 12:00AM
Day Selection [Disabled/Every Day/Weekdays/Select Days] Disabled
Under [Select Days] when Enabled [Sunday/Monday…/Saturday] Not applicable
USB Wake Support —[Enable/Disable]
Enabled
Wake on LAN/WLAN
[Disabled/WLAN Only/LAN Only/LAN or WLAN/LAN with PXE
Boot]
Disabled
Block Sleep(S3 state) [Enable/Disable]
Disabled
POST behavior
Item
Default value
Numlock LED — [Enable/Disable] Enabled
Keyboard Errors — Enable Keyboard Error Detection [Enable/
Disable]
Enabled
Fastboot — [Minimal/Thorough/Auto] Thorough
Extend BIOS POST Time — [0 seconds/5 seconds/10 seconds] 0 Seconds
Warnings and Errors —[Disable/Continue on Warnings/Continue
on Warnings and Errors]
Continue on Warnings and Errors
Virtualization support (BIOS level 1)
Item
Default value
Intel Virtualization Technology — [Enable/Disable] Enabled
VT for Direct I/O —[Enable/Disable] Enabled
Trusted Execution — [Enable/Disable] Disabled
Wireless
Item
Default value
Wireless Device Enable — WLAN/WiGig [Enable/Disable] Enabled
BIOS defaults 49