Users Guide

• Connect the power terminal block to the adapter port and torque the screws at 5.07 kilograms-centimeter (4.4 pounds-inch) to
secure it to the Embedded Box PC.
5. Turn on the Embedded Box PC, and complete the operating system setup.
NOTE:
After the Embedded Box PC setup is complete, reinstall the dust covers on any unused ports.
Topics:
• Mounting the Embedded Box PC on the wall
Mounting the Embedded Box PC on the wall
Mount the Embedded Box PC on a wall by using the mounting brackets.
NOTE:
The Embedded Box PC is shipped with only those screws that are required for securing the two mounting
brackets to the back of the Embedded Box PC.
1. Secure the two mounting brackets to the back of the Embedded Box PC by using eight M3x8 screws.
NOTE:
Torque the screws at 3 to 3.4 kilograms-centimeter (2.6 to 3.0 pounds-inch).
16 Setting up the Embedded Box PC