Service Manual

Removing the coin-cell battery

OPOMBA Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded

Box PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box

PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

POZOR Removing the coin-cell battery resets the BIOS setup program’s settings to default. It is recommended that you

note the BIOS setup program’s settings before removing the coin-cell battery.

Teme:

• Prerequisites

• Procedure

Prerequisites

1. Follow step 1 to step 6 in “Removing the back cover”.

2. Remove the PCI/PCIe card (if installed).

Procedure

1. Using a plasic scribe, push the battery-release lever away from the coin-cell battery until the coin-cell battery pops up.

2. Lift the coin-cell battery out of its socket.

a. plastic scribe

b. battery-release lever

60 Removing the coin-cell battery