Service Manual

Removing the PCI/PCIe card

OPOMBA Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded

Box PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box

PC, follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Teme:

• Prerequisites

• Procedure

Prerequisites

Follow step 1 to step 6 in “Removing the back cover”.

Procedure

1. Remove the screws that secure PCI/PCIe cards to the chassis.

a. chassis

b. PCIe card

c. M3x5 countersunk screws (2)

2. Remove the screws that secure the PCI/PCIe filler-plate bracket to the chassis.

3. Remove the bracket from the chassis.

4. Remove the filler-plate from the chassis.

Removing the PCI/PCIe card 29