Service Manual

Replacing the coin-cell battery

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box

PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,

follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

With the positive-side facing up, snap the coin-cell battery into the battery socket on the system board.

Post-requisites

1. Replace the PCI/PCIe card (if necessary).

2. Follow step 2 to step 8 in “Replacing the back cover”.

62 Replacing the coin-cell battery