Service Manual

Replacing the PCIe card

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box

PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,

follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Topics:

• Procedure

• Post-requisites

Procedure

1. Install the PCI/PCIe cards in their respective slots on the riser board.

a. riser card

b. PCIe-card slot

c. PCIe card

2. Replace the filler plate for an empty card slot.

3. Replace the bracket on the chassis.

4. Replace the screw that secures the bracket to the chassis.

Replacing the PCIe card 31