Service Manual

Removing the hard-drive cage

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box

PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,

follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

CAUTION: Hard drives/solid-state drives are fragile. Exercise care when handling the Solid-state/hard drive.

CAUTION: To avoid data loss, do not remove the hard drive/solid-state drive while the Embedded Box PC is in sleep or

on state.

Topics:

• Prerequisites

• Procedure

Prerequisites

Follow step 1 to step 6 in “Removing the back cover”.

Procedure

1. Remove the screws that secure the hard-drive cage to the back cover.

2. Lift the hard-drive cage from the back cover.

a. hard-drive cage

b. M3x5 screws(4)

c. back cover

Removing the hard-drive cage 17