Service Manual

Technical overview

NOTE: Before working inside your Embedded Box PC, read the safety information that shipped with your Embedded Box

PC and follow the steps in Before working inside your Embedded Box PC. After working inside your Embedded Box PC,

follow the steps in After working inside your Embedded Box PC. For more safety best practices, see the Regulatory

Compliance home page at www.dell.com/regulatory_compliance.

Topics:

• System-board components

System-board components

1. PCI slot 2. SATA power-connector one (SATAPWR1)

3. SATA power-connector two (SATAPWR2) 4. SATA data-connector one (SATA2)

5. power cable connector (PWR IN) 6. mPCIE connector one (CAN BUS/WWAN)

7. intrusion-switch cable connector (INTRUSION) 8. SIM-card slot (SIM SLOT)

9. service mode reset jumper (SVC MODE) 10. password reset jumper (PWD)

11. mPCIE connector two (CAN BUS/WLAN/BT) 12. remote power-button cable connector (PWR BTN)

13. serial-port cable connector 14. coin-cell battery socket

15. CMOS reset jumper (CMOS) 16. PCIex16 slot

17. CPU-board connector (DB CN1 & DB CN2) 18. SATA data-connector two (SATA1)

Technical overview 13