Users Guide
Table Of Contents
- Dell Embedded Box PC 3000
- Overview
- Features
- Setting up the Embedded Box PC
- Setting up your operating system
- Ubuntu Desktop
- Windows OS
- Windows 7 Professional SP1
- Windows 7 Professional for Embedded Systems SP1
- Windows Embedded Standard 7 P/E
- Windows 10 Professional
- Windows 10 IoT Enterprise LTSB 2015
- Recommended drivers and applications for Embedded Box PC running Windows operating system
- Specifications
- Activating your mobile broadband service
- Using the Multi-function port cable
- Setting up the ZigBee Dongle
- Connector kit
- BIOS defaults
- Contacting Dell
Features
Top view
Features
1 Front access door Loosen the captive screw that secures the front access door to the
chassis. Remove the front access door to access the hard drive,
solid-state drive, or SIM-card slot.
2 USB 3.0 port Connect a USB enabled device. Provides data transfer speeds up to 5
Gbps.
3 Hard reset Using a pin, press the button located inside the pin hole to restart the
Embedded Box PC.
4 Power button Press to turn on or off the Embedded Box PC.
Bottom view
Features
1 Network port one Connect an Ethernet (RJ45) cable for network access. Provides data
transfer speeds up to 10/100/1000 Mbps.
2 USB 2.0 ports (2) Connect USB enabled devices. Provides data transfer speeds up to
480 Mbps.
3 VGA port Connect a monitor or another VGA enabled device. Provides video
output. For more information, see VGA connector mapping.
4 Multi-function port (female) Connect Multi-function port cable (optional). For more information,
see Using the Multi-function port cable.
5 RS232/RS485 port one (configurable in the BIOS) Connect a RS232/RS485 cable to the Embedded Box PC. For more
information, see RS232/RS485 connector mapping.
6 12-26V DC power port Connect a 12-26V DC power cable for supplying power to the
Embedded Box PC. For more information about the physical
dimensions of the DC power port, see DC power port.
2
6 Features