Users Guide
Table Of Contents
- Dell Embedded Box PC 3000
- Overview
- Features
- Setting up the Embedded Box PC
- Setting up your operating system
- Ubuntu Desktop
- Windows OS
- Windows 7 Professional SP1
- Windows 7 Professional for Embedded Systems SP1
- Windows Embedded Standard 7 P/E
- Windows 10 Professional
- Windows 10 IoT Enterprise LTSB 2015
- Recommended drivers and applications for Embedded Box PC running Windows operating system
- Specifications
- Activating your mobile broadband service
- Using the Multi-function port cable
- Setting up the ZigBee Dongle
- Connector kit
- BIOS defaults
- Contacting Dell
Activating your mobile broadband service
NOTE: For more information about installing the SIM card, see the Embedded Box PC Service Manual at www.dell.com/
support.
1. Turn on the Embedded Box PC.
2. Follow these steps to connect to the mobile broadband network:
NOTE:
To activate your mobile broadband service, contact your service provider with the following information:
Windows OS
a. From the task bar select the Network icon and then select Cellular.
The Cellular page is displayed.
b. Select your Mobile Broadband Carrier to expand the options.
c. Select Advanced Options.
The options are displayed.
d. Make a note of the International Mobile Equipment Identity (IMEI) and the Integrated Circuit Card Identifier (ICCID).
Ubuntu OS
Open a Terminal window.
a. Go to super user mode by entering:$sudo su -
b. Configure the Mobile Broadband connection profile:
#nmcli con add type gsm ifname ttyACM3 con-name <connection name> apn <apn> user <user name>
password <password>
c. Connect to the mobile network: #nmcli con up <connection name>
To disconnect from the mobile network: #nmcli con down <connection name>.
6
32 Activating your mobile broadband service