Users Guide
Table Of Contents
- Dell Embedded Box PC 3000
- Overview
- Features
- Setting up the Embedded Box PC
- Setting up your operating system
- Ubuntu Desktop
- Windows OS
- Windows 7 Professional SP1
- Windows 7 Professional for Embedded Systems SP1
- Windows Embedded Standard 7 P/E
- Windows 10 Professional
- Windows 10 IoT Enterprise LTSB 2015
- Recommended drivers and applications for Embedded Box PC running Windows operating system
- Specifications
- Activating your mobile broadband service
- Using the Multi-function port cable
- Setting up the ZigBee Dongle
- Connector kit
- BIOS defaults
- Contacting Dell
LAN network configuration
1. Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
WLAN network configuration
1.
Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
Bluetooth configuration
1. Click Start and type Bluetooth in the search box.
2. Click Change Bluetooth settings from the search result.
The Bluetooth Settings dialog box appears.
DW5580 network configuration
Follow the Service Manual to install and configure the DW5580 module and the corresponding carrier SIM card for the system. Once the
module and the SIM card are installed, follow these steps to connect and disconnect from WWAN.
1. Click Start and type Network in the search box.
2. Click Network and Sharing Center from the search result.
The Network and Sharing Center window appears.
3. From the left panel, click Change adapter settings.
4. Locate the required WWAN connection.
5. Right-click the WWAN connection, and then select Connect or Disconnect to connect to or disconnect from the WWAN adapter,
respectively.
Common port mappings
Serial port mapping
The following table shows the serial port mapping at the bottom of the Embedded Box PC 3000 with the Dell factory installed Windows 7
Professional SP1 OS image.
Table 1. Serial port mapping
Number Port Type Connector Device Node
1 RS232/485 DB9 COM1
2 Multi-function port
(RS232/422)
7-in-1 cable COM2
3 RS232/485 DB9 COM3
Windows 7 Professional for Embedded Systems SP1
Overview
The Embedded Box PC is shipped with Windows 7 Professional for Embedded Systems. For more information, see https://
docs.microsoft.com/en-us/windows/iot-core/.
Boot up and log in
Before configuring the Windows 7 Professional for Embedded Systems, connect a keyboard, mouse, and monitor to the Embedded Box
PC. Turn on the Embedded Box PC to boot into Windows.
20
Setting up your operating system