Users Guide
Table Of Contents
- Dell Embedded Box PC 3000
- Overview
- Features
- Setting up the Embedded Box PC
- Setting up your operating system
- Ubuntu Desktop
- Windows OS
- Windows 7 Professional SP1
- Windows 7 Professional for Embedded Systems SP1
- Windows Embedded Standard 7 P/E
- Windows 10 Professional
- Windows 10 IoT Enterprise LTSB 2015
- Recommended drivers and applications for Embedded Box PC running Windows operating system
- Specifications
- Activating your mobile broadband service
- Using the Multi-function port cable
- Setting up the ZigBee Dongle
- Connector kit
- BIOS defaults
- Contacting Dell
2. Secure the two mounting brackets to the back of the Embedded Box PC by using two M3x5 screws.
NOTE:
Torque the screws at 3 to 3.4 kilograms-centimeter (2.6 to 3.0 pounds-inch).
3. Drill four holes in the wall that correspond to the holes on the mounting brackets.
4. Place the Embedded Box PC against the wall and align the holes on the mounting brackets with the holes on the wall.
14
Setting up the Embedded Box PC