Service Manual

Replacing the Dell logo board
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
Before working inside your Embedded Box PC.
After working inside your Embedded Box PC, follow the steps in After
working inside your Embedded Box PC. For more safety best practices,
see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Place the Dell logo board into the chassis.
2 Replace the screws that secure the Dell logo board to the chassis.
Post-requisites
1 Replace the system board.
2 Replace the IET board.
3 Replace the top cover.
4 Replace the I/O plate.
5 Replace the WWAN-antenna connectors.
6 Replace the WLAN-antenna connectors.
7 Replace the CANbus cable.
8 Replace the intrusion switch.
9 Replace the WWAN card.
10 Replace the WLAN card.
11 Replace the CANbus card.
12 Replace the SIM card.
13 Replace the hard drive or solid-state drive.
14 Replace the back cover.
92