Service Manual

Replacing the WLAN-antenna

connectors

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1 Insert the WLAN-antenna connectors into the WLAN-cable port on the

I/O plate.

NOTE: Ensure that the WLAN-antenna cable color matches with the

color indicated behind the I/O plate.

2 Route the WLAN-antenna cable between the IET board and system

board.