Service Manual

Removing the WLAN-antenna

connectors

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1 Remove the back cover.

2 Remove the I/O plate.

Procedure

1 Remove the WLAN-antenna cables from the WLAN card.

2 Remove the WLAN-antenna connectors from the WLAN-cable slot.