Service Manual

Replacing the intrusion switch

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Procedure

1 Replace the screw that secures the intrusion-switch bracket to the

chassis.

2 Slide the intrusion-switch cable into the connector on the system board.

Post-requisites

Replace the back cover.