Service Manual

Replacing the CANbus card

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Procedure

1 Align the notch on the CANbus card with the tab on the mPCIE1 slot.

2 Insert the CANbus card at an angle into the mPCIE1 slot.

3 Align the screw holes on the CANbus card with the screw holes on the

system board.