Service Manual

Removing the CANbus cable

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

Remove the back cover.

Procedure

1 Remove the CANbus cable from the connector on the CANbus card.

2 Remove CANbus cable from the cable-routing guide on the IET board.