Service Manual

Replacing the solid-state drive

card bracket

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1 Align the screw holes on the solid-state drive card bracket with the screw

holes on the hard-drive bracket.

2 Replace the screws that secure the solid-state drive card bracket to the

hard-drive bracket.

Post-requisites

1 Replace the interposer board.

2 Replace the solid-state drive.