Service Manual

Replacing the back cover

WARNING: Before working inside your Embedded Box PC, read the

safety information that shipped with your Embedded Box PC and

follow the steps in

Before working inside your Embedded Box PC.

After working inside your Embedded Box PC, follow the steps in After

working inside your Embedded Box PC. For more safety best practices,

see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Procedure

1 Place the back cover on the chassis.

2 Align the screw holes on the back cover with the screw holes on the

chassis.

3 Replace the screws that secure the back cover to the chassis.