Users Guide

Features

7 Cable conduit openings (8) Route the cables through the conduits (1 inch and 0.75 inch

diameter).

8 Primary ground (internal) Connect the grounding cable to the system.

9 Primary ground (external) Connect the grounding cable to the system.

10 Door-stop cables (2) Restricts the door from opening.

11 Door thermal ribs Dissipates the heat generated by the system.

Setting up the enclosure

1. Install the enclosure’s wall-mount bracket at a desired location and secure it to the wall using the wall-mount screws.

NOTE: Ensure that the notch on the bracket is on the top.

NOTE: The wall-mount screws are not included with the enclosure.

2. Open the enclosure.

3. Place the enclosure on the wall-mount bracket, and align the tab on the back of the enclosure so that it ts into the notch on

the wall bracket.