Users Guide

• Download the latest BIOS le from www.dell.com/support.

• USB 2.0 or USB 3.0 ash drive (4 GB minimum)

• Power o the Edge Gateway.

1. On a separate computer, unzip the BIOS update le that you have downloaded from www.dell.com.

2. Open the extracted le folder Edge_Gateway5000_1.X.X.

3. Copy the BIOS update le labeled as Edge_Gateway5000_1.X.X.exe to a USB ash drive.

4. Insert the USB ash drive in one of the available USB ports on the Edge Gateway.

5. Power on the Edge Gateway.

6. When the Dell logo is displayed on the screen, press F12 to enter the one-time boot screen.

7. On the one-time boot screen, select Flash the BIOS .

8. On the next screen, select the BIOS le (Edge_Gateway5000_1.X.X.exe) on the USB key.

9. Start the ash process.

Wind River Linux

Overview

The Edge Gateway is shipped with Wind River Linux IDP-XT version 3.1. For more information on Wind River operating system, see

www.windriver.com/support.

For generic details and references on running Wind River Linux IDP 3.1 on a Edge Gateway product, see www.intel.com/

gatewaytraining.

Boot up and login

Before conguring the Wind River OS, connect a keyboard, mouse, and monitor to the Edge Gateway, or connect to the Edge

Gateway through a KVM session, Dell Wyse Cloud Client Manager (CCM), or Dell Command | Monitor (DCM).

NOTE: For more information about using the CCM, see the CCM documentation available at

www.cloudclientmanager.com.

NOTE: For more information about using the DCM, see the DCM documentation available at www.dell.com/

clientsystemsmanagement.

Power On the Edge Gateway to boot into Wind River Linux OS. The Wind River Linux does not have a graphical user interface (GUI).

Log into the OS on the terminal with the following default credentials.