Service Manual

20
Removing the status-light board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the top cover.
2. Remove the wireless card.
3. Remove the mobile broadband card.
4. Remove the base frame.
5. Remove the DIP switch board.
Procedure
1. Remove the screws that secure the status-light board to the base frame.
2. Lift the status-light board of the base frame.
1.
screws (3) 2. status-light board
3. bstatus-light board cable
31