Service Manual

18
Removing the DIP switch board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the top cover.
2. Remove the wireless card.
3. Remove the mobile broadband card.
4. Remove the base frame.
Procedure
1. Remove the screws that secure the DIP switch board assembly to the status-light board.
2. Lift the DIP switch board assembly of the status-light board.
1.
base frame 2. status-light board
3. DIP switch board assembly 4. screws (2)
3. Remove the screws that secure that DIP switch board to the metal frame.
4. Remove the DIP switch board of the metal frame.
28