Users Guide

2. When prompted, log in using the default credentials. The default user name and password are both admin. The default

computer name is the service tag.

For example;

Ubuntu Core 16 on 127.0.0.1 (tty1)

localhost login: admin

Password: admin

Boot up and log in – Static IP system configuration

This allows you to connect your Edge Gateway through a host computer, which must be on the same subnet.

NOTE: The static IP address of Ethernet port two on the Edge Gateway is set to these values at the factory:

● IP address: 192.168.2.1

● Subnet mask: 255.255.255.0

● DHCP server: Not applicable

On the host computer, configure the Ethernet adaptor that is connected to the Edge Gateway with a static IPv4 address

under the same subnet. Set the IPv4 address to 192.168.2.x (where x represents the last digit of the IP address, for

example, 192.168.2.2).

NOTE: Do not set the IPv4 address to the same IP address as the Edge Gateway. Use an IP address between

192.168.2.2 to 192.168.2.254.

2. Set the subnet mask to 255.255.255.0.

Appendix