Users Guide

2. Check the modem status and identify the primary port.

$ sudo modem-manager.mmcli -m <x>

NOTE: <x> refers to the modem index number. Replace <x> with the modem index number after running the command

at step 1.

3. Create a profile.

$ sudo network-manager.nmcli c add con-name test type gsm ifname <primary port> apn

internet

NOTE: Depending on the return results from step 2, replace <primary port > after ifname with the actual primary port

name.

Check the WWAN status.

$ network-manager.nmcli r wwan

5. Turn on WWAN.

$ sudo network-manager.nmcli r wwan on

6. Find wwan0 in the interface list.

$ ifconfig -a

7. Enable the connection profile.

$ sudo network-manager.nmcli c up test

8. Check the Network Manager status.

$ network-manager.nmcli d

9. Disable the connection profile.

$ sudo network-manager.nmcli c down test

10. Check the Network Manager status.

$ network-manager.nmcli d

Connecting through WLAN

1. Show a list of network interfaces like eth0, eth1, wlan0, mlan0, and so on.

$ network-manager.nmcli d

2. Show a list of network interfaces like eth0, eth1, wlan0, mlan0, and so on.

$ network-manager.nmcli d

3. Show a list of available wireless access points.

$ network-manager.nmcli device wifi list

4. Wireless connection with nmcli: Run the following commands and replace $SSID, $PSK, and $WIFI_INTERFACE with the

variables for your environment.

● Connect:

$ sudo network-manager.nmcli dev wifi connect $SSID password $PSK ifname

$WIFI_INTERFACE

● Disconnect:

$ sudo network-manager.nmcli dev disconnect $WIFI_INTERFACE

Setting up the operating system