Users Guide

Table 6. Right view—3002 (continued)
Features
2 USB 2.0 port
1
Connect a USB enabled device. Provides data transfer speeds
up to 480 Mbps.
3 Ethernet port two (Non-PoE) Connect an Ethernet (RJ45) cable for network access. Provides
data transfer speeds up to 10/100 Mbps.
For information on how to configure Ethernet settings, such as
duplex configuration, see:
● Windows 10 IoT Enterprise LTSB 2016: Ethernet
configuration
1
USB power is limited to 0.4 A/2 W.
Table 7. CANbus-port pin definition details
Features
1 GND Ground
2 CAN-H High-level CANbus line
3 CAN-L Low-level CANbus line
10 System views