Setup Guide
32 33
Connect a network cable from Ethernet port one on the Edge Gateway to a DHCP-enabled network or
router that provides IP addresses.
Branchez un câble réseau du port Ethernet1 du système Edge Gateway sur un réseau ou routeur compatible avec
DHCP qui fournit les adressesIP.
Hubungkan kabel jaringan dari Ethernet port satu pada Edge Gateway ke jaringan dengan DHCP aktif atau router
yang menyediakan alamat IP.
.IPDHCP
1
NOTE: Edge Gateway 3003 can also be configured remotely.
REMARQUE: le système EdgeGateway3003 peut également être configuré à distance.
CATATAN: Edge Gateway 3003 dapat juga dikonfigurasi jarak jauh.
NOTE: The first-time boot to Windows takes about five minutes for system configuration. Subsequent boots take
approximately 50 seconds.
REMARQUE: le premier démarrage dans Windows prend environ cinq minutes en raison de la configuration du
système. Les démarrages suivants prennent environ 50secondes.
CATATAN: Boot pertama pada Windows membutuhkan waktu lima menit untuk konfigurasi sistem. Boot
berikutnya memerlukan kurang lebih 50 detik.
Windows 10 IOT Enterprise LTSB 2016
Remote system configuration—Edge Gateway 3001/3002
Configuration à distance du système Edge Gateway 3001/3002
Konfigurasi sistem jarak jauh—Edge Gateway 3001/3002
NOTE: A Windows-based computer is required for remote system configuration and static IP configuration.
REMARQUE: un ordinateur Windows est requis pour la configuration à distance du système pour la configuration
d’une adresse IP statique.
CATATAN: Komputer berbasis Windows diperlukan untuk konfigurasi sistem jarak jauh dan konfigurasi IP statis.
IP