Setup Guide

50 51
Connect to the Edge Gateway remotely on a Windows computer as instructed in 9. Finish the
operating system setup.
Připojte zařízení Edge Gateway vzdáleně kpočítači se systémem Windows podle pokynů včásti 9. Dokončete
nastavení operačního systému.
Pripojte sa vzdialene k zariadeniu Edge Gateway pomocou počítača so systémom Windows podľa pokynov v kroku
9. Dokončite nastavenie operačného systému
Conéctese al sistema EdgeGateway de manera remota en una computadora con Windows, como se indica
en9. Finalice la configuración del sistema operativo.
9'da anlatıldığı gibi bir Windows bilgisayarda Edge Gateway'e uzaktan bağlanın. İşletim sistemi kurulumunu
tamamlayın.
Click Start → All Programs → Dell → Command Configure → Dell Command | Configure Wizard.
Klikněte na možnosti Start → Všechny programy → Dell → Command Configure → Dell Command |
Configure Wizard.
Kliknite na ikonu Štart → Všetky programy → Dell → Command Configure → Dell Command | Configure
Wizard.
Haga clic en Inicio→ Todos los programas→ Dell → Command Configure → Asistente Dell Command |
Configure.
Başlat → Tüm Programlar → Dell → Komut Yapılandırması → Dell Command | Yapılandırma Sihirbazı'na
tıklayın.
Ubuntu Core 16
Ubuntu Core16
Ubuntu Core16
UbuntuCore16
Ubuntu Core 16
Connect to the Edge Gateway remotely as instructed in 9. Finish the operating system setup.
Připojte zařízení Edge Gateway vzdáleně podle pokynů včásti 9. Dokončete nastavení operačního systému.
Pripojte sa vzdialene k zariadeniu Edge Gateway podľa pokynov v kroku 9. Dokončite nastavenie operačného systému.
Conéctese al sistema EdgeGateway de manera remota, como se indica en9. Finalice la configuración del sistema
operativo.
9'da anlatıldığı gibi Edge Gateway'e uzaktan bağlanın. İşletim sistemi kurulumunu tamamlayın.
1
On the connected computer running Ubuntu Core, access Dell Command | Configure using the command
dcc.cctk.
Na připojeném počítači se systémem Ubuntu Core spusťte aplikaci Dell Command | Configure pomocí příkazu
dcc.cctk.
Na pripojenom počítači so systémom Ubuntu Core spustite aplikáciu Dell Command | Configure zadaním príkazu
dcc.cctk.
En la computadora conectada que esté ejecutando UbuntuCore, acceda a DellCommand|Configure mediante el
comando dcc.cctk.
Snappy Ubuntu Core çalıştıran bağlı bir bilgisayarda, dcc.cctk komutunu kullanarak Dell Command | Configure
öğesine erişin.
2
1
2
Windows 10 IOT Enterprise LTSB 2016
Systém Windows10 IOT Enterprise LTSB 2016
Windows 10 IOT Enterprise LTSB 2016
Windows10 IOTEnterprise LTSB2016
Windows 10 IOT Enterprise LTSB 2016