Service Manual

Replacing the WWAN bracket

WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway

and follow the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the

steps in After working inside your Edge Gateway. For more safety best practices, see the Regulatory Compliance home

page at www.dell.com/regulatory_compliance.

Procedure

1. Align the screw hole on the WWAN bracket with the screw hole on the system board.

2. Replace the screw (M2x4) that secures the WWAN bracket to the system board.

Post-requisites

1. Replace the left-I/O bracket.

2. Replace the right-I/O bracket.

3. Replace the right-I/O cover.

4. Replace the antenna-cable bracket.

5. Replace the front cover.

6. Replace the coin-cell battery.

7. Replace the WWAN card.