Service Manual

16
Replacing the left-I/O bracket
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway
and follow the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the
steps in After working inside your Edge Gateway. For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1. Align the left-I/O bracket on the left-I/O ports and place the left-I/O bracket on the system board.
2. Replace the screw (M3x10) that secures the left-I/O bracket to the system board.
Post-requisites
1. Replace the coin-cell battery.
2. Replace the antenna-cable bracket.
3. Replace the front cover.
27