Service Manual

Removing the left-I/O bracket

WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway

and follow the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the

steps in After working inside your Edge Gateway. For more safety best practices, see the Regulatory Compliance home

page at www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the front cover.

2. Remove the antenna-cable bracket.

3. Remove the coin-cell battery.

Procedure

1. Remove the screw (M3x10) that secures the left-I/O bracket to the system board.

2. Lift the left-I/O bracket o the system board.