Service Manual

5
Removing the antenna-cable bracket
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway
and follow the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the
steps in After working inside your Edge Gateway. For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
Remove the front cover.
Procedure
NOTE: The ZigBee cable will be present depending on the conguration ordered.
1. Remove the nuts that secure the antenna connectors to the system base.
2. Remove the washers that secure the antenna connectors to the system base.
3. Remove the antenna cables from the routing guides on the antenna bracket.
14