Service Manual

3
Removing the front cover
WARNING: Before working inside your Edge Gateway, read the safety information that shipped with your Edge Gateway
and follow the steps in Before working inside your Edge Gateway. After working inside your Edge Gateway, follow the
steps in After working inside your Edge Gateway. For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1. Turn the system over and place the system on a clean and at surface.
2. Remove the four screws (M3x18) that secure the front cover to the system base.
3. Turn the system over.
4. Lift the front cover o the system base.
11