Users Guide
Table Of Contents
- Dell Edge Gateway 3001 Installation and Operation Manual
- Overview
- System views
- Installing your Edge Gateway
- Safety and regulatory information
- Setting up your Edge Gateway
- Activating your mobile broadband service
- Mounting your Edge Gateway
- Mounting the Edge Gateway using the standard-mount bracket
- Mounting the Edge Gateway using quick-mount bracket
- Attaching the cable control bars to the standard-mount bracket
- Mounting the Edge Gateway on a DIN rail using the DIN-rail bracket
- Mounting the Edge Gateway using the perpendicular mount
- Mounting the Edge Gateway using a VESA mount
- Setting up the ZigBee dongle
- Setting up the operating system
- Windows 10 IoT Enterprise LTSB 2016
- Ubuntu Core 16
- Overview
- Boot up and log in – Remote system configuration
- Updating operating system and applications
- Additional Ubuntu commands
- Ubuntu Network Manager
- Serial ports
- Minicom
- GPIO
- Security
- Watchdog Timer (WDT)
- Cloud LED On/Off
- Global Positioning Systems (GPS)
- Snappy auto update/Autopilot
- Accessing Snappy Store/Snapweb
- Sensors
- Ignition Pin
- System Power Management
- Restoring Ubuntu Core 16
- Flashing a new OS image
- Ubuntu Server
- Overview
- Login to the Edge Gateway using Ethernet Port 1
- Installing or configuring Dynamic Host Configuration Protocol (DHCP) daemon
- Ubuntu Server driver information
- Firmware management on Ubuntu Server
- Configure Watchdog Timer (WDT)
- Trusted Platform Module (TPM)
- Cloud LED On/Off
- Advanced Linux Sound Architecture (ALSA)
- Global Positioning Systems (GPS)
- Serial ports
- GPIO
- Sensors
- Ignition Pin
- System Power Management
- Ubuntu Network Manager
- Restoring Ubuntu Server
- Creating the OS recovery USB flash drive
- Accessing and updating BIOS
- References
- Appendix
- Contacting Dell
Appendix
Antenna specifications
The Edge Gateway is professionally-installed equipment. The Radio Frequency (RF) output power does not exceed the maximum
limit allowed in the country of operation.
CAUTION: Unauthorized antennas, modifications, or attachments may damage the device and potentially violate
international regulations.
NOTE: Use only the supplied or an approved replacement antenna.
NOTE: Modifications to the device or use of unauthorized antennas not expressly approved by Dell is the sole responsibility
of the user, configurator or operator, who must reassess the equipment in accordance to all applicable international Safety,
EMC, and RF standards.
The Dell-authorized antenna specifications are as follows:
● Mobile Broadband
○ Main: Dipole
○ LTE Auxiliary: PIFA
● GPS/WLAN/Zigbee: Monopole
The following tables provide the gain specifications for different antenna positions.
Table 42. Mobile broadband main antenna maximum gain (dBi)
Antenna position—Bent Antenna position—Straight
Frequency (MHz) 3G (dBi) 4G (dBi) 3G (dBi) 4G (dBi)
704~806
Not applicable
2
Not applicable
1.7
824~894 1 1.4 2.1 2.1
880~960 0.5 1.4 1.4 1.5
1710~1880 3.2 4.2 1.9 3
1850~1990 3.9 4.3 3.2 3.4
1920~2170 4 4.4 3.2 3.4
Table 43. Mobile broadband auxiliary antenna maximum gain (dBi)
Antenna position—Bent Antenna position—Straight
Frequency (MHz) 4G (dBi) 4G (dBi)
704~806 0.6 1.9
824~894 –0.3 –0.1
880~960 –1.9 –2.5
8
Appendix 95