Users Guide
Table Of Contents
- Dell Edge Gateway 3001 Installation and Operation Manual
- Overview
- System views
- Installing your Edge Gateway
- Safety and regulatory information
- Setting up your Edge Gateway
- Activating your mobile broadband service
- Mounting your Edge Gateway
- Mounting the Edge Gateway using the standard-mount bracket
- Mounting the Edge Gateway using quick-mount bracket
- Attaching the cable control bars to the standard-mount bracket
- Mounting the Edge Gateway on a DIN rail using the DIN-rail bracket
- Mounting the Edge Gateway using the perpendicular mount
- Mounting the Edge Gateway using a VESA mount
- Setting up the ZigBee dongle
- Setting up the operating system
- Windows 10 IoT Enterprise LTSB 2016
- Ubuntu Core 16
- Overview
- Boot up and log in – Remote system configuration
- Updating operating system and applications
- Additional Ubuntu commands
- Ubuntu Network Manager
- Serial ports
- Minicom
- GPIO
- Security
- Watchdog Timer (WDT)
- Cloud LED On/Off
- Global Positioning Systems (GPS)
- Snappy auto update/Autopilot
- Accessing Snappy Store/Snapweb
- Sensors
- Ignition Pin
- System Power Management
- Restoring Ubuntu Core 16
- Flashing a new OS image
- Ubuntu Server
- Overview
- Login to the Edge Gateway using Ethernet Port 1
- Installing or configuring Dynamic Host Configuration Protocol (DHCP) daemon
- Ubuntu Server driver information
- Firmware management on Ubuntu Server
- Configure Watchdog Timer (WDT)
- Trusted Platform Module (TPM)
- Cloud LED On/Off
- Advanced Linux Sound Architecture (ALSA)
- Global Positioning Systems (GPS)
- Serial ports
- GPIO
- Sensors
- Ignition Pin
- System Power Management
- Ubuntu Network Manager
- Restoring Ubuntu Server
- Creating the OS recovery USB flash drive
- Accessing and updating BIOS
- References
- Appendix
- Contacting Dell
Table 35. Secure boot (BIOS level 1) (continued)
BIOS level 2 BIOS level 3 Item Default value
Expert Key Management Expert Key Management Enable Custom Mode
[Enable/Disable]
Disabled
Custom Mode Key
Management {PK/KEK/db/
dbx}
PK
Performance (BIOS level 1)
Table 36. Performance (BIOS level 1)
BIOS level 2 BIOS level 3 Item Default value
Inter SpeedStep Enable Intel SpeedStep
[Enable/Disable]
Enabled
C-States Control C-States Control C-states [Enable/Disable] Enabled
Limit CPUID Value Limit CPUID Value Enable CPUID Limit [Enable/
Disable]
Disabled
Power management (BIOS level 1)
Table 37. Power management (BIOS level 1)
BIOS level 2 BIOS level 3 Item Default value
Auto On Time Auto On Time Time Selection: [HH:MM A/P]
Auto On Time (if Wake Period
=0)
12:00AM
Value Selection: [0-254]
Auto-Wake Period (0-254
minutes)
000
Day Selection: [Disabled/
Every Day/Weekdays/Select
Days]
Disabled
Under [Select Days] when
enabled [Sunday/Monday…/
Saturday]
Not applicable
Wake on LAN/WLAN Wake on LAN/WLAN [Disabled/LAN Only/WLAN
only/LAN or WLAN]
Disabled
POST behavior (BIOS level 1)
Table 38. POST behavior (BIOS level 1)
BIOS level 2 BIOS level 3 Item Default value
Numlock LED Numlock LED Enable Numlock LED [Enable/
Disable]
Enabled
Accessing and updating BIOS 91