Users Guide
Table Of Contents
- Dell Edge Gateway 3001 Installation and Operation Manual
- Overview
- System views
- Installing your Edge Gateway
- Safety and regulatory information
- Setting up your Edge Gateway
- Activating your mobile broadband service
- Mounting your Edge Gateway
- Mounting the Edge Gateway using the standard-mount bracket
- Mounting the Edge Gateway using quick-mount bracket
- Attaching the cable control bars to the standard-mount bracket
- Mounting the Edge Gateway on a DIN rail using the DIN-rail bracket
- Mounting the Edge Gateway using the perpendicular mount
- Mounting the Edge Gateway using a VESA mount
- Setting up the ZigBee dongle
- Setting up the operating system
- Windows 10 IoT Enterprise LTSB 2016
- Ubuntu Core 16
- Overview
- Boot up and log in – Remote system configuration
- Updating operating system and applications
- Additional Ubuntu commands
- Ubuntu Network Manager
- Serial ports
- Minicom
- GPIO
- Security
- Watchdog Timer (WDT)
- Cloud LED On/Off
- Global Positioning Systems (GPS)
- Snappy auto update/Autopilot
- Accessing Snappy Store/Snapweb
- Sensors
- Ignition Pin
- System Power Management
- Restoring Ubuntu Core 16
- Flashing a new OS image
- Ubuntu Server
- Overview
- Login to the Edge Gateway using Ethernet Port 1
- Installing or configuring Dynamic Host Configuration Protocol (DHCP) daemon
- Ubuntu Server driver information
- Firmware management on Ubuntu Server
- Configure Watchdog Timer (WDT)
- Trusted Platform Module (TPM)
- Cloud LED On/Off
- Advanced Linux Sound Architecture (ALSA)
- Global Positioning Systems (GPS)
- Serial ports
- GPIO
- Sensors
- Ignition Pin
- System Power Management
- Ubuntu Network Manager
- Restoring Ubuntu Server
- Creating the OS recovery USB flash drive
- Accessing and updating BIOS
- References
- Appendix
- Contacting Dell
Table 33. System configuration (BIOS level 1) (continued)
BIOS level 2 BIOS level 3 Item Default value
[Disabled, Enabled, Enabled
w/PXE]
Enabled w/PXE
Serial Port1 [Disable, RS232, RS-485
HALF DUPLEX, RS-485/422
FULL DUPLEX]
RS232
Serial Port2 [Disable, RS232, RS-485
HALF DUPLEX, RS-485/422
FULL DUPLEX]
RS232
USB Configuration USB Configuration Enable Boot Support [Enable/
Disable]
Enabled
Enable USB 3.0 Controller
[Enable/Disable]
Enabled
Enable USB Port1 [Enable/
Disable]
Enabled
Enable USB Port2 [Enable/
Disable]
Enabled
Miscellaneous Devices Enable WWAN [Enable/
Disable]
Enabled
Enable WLAN/Bluetooth
[Enable/Disable]
Enabled
Enable Dedicated GPS Radio
[Enable/Disable]
Enabled
Enable MEMs Sensor
[Enable/Disable]
Enabled
Watchdog Timer Support Watchdog Timer Support Enable Watchdog Timer
[Enable/Disable]
Disabled
Security (BIOS level 1)
Table 34. Security (BIOS level 1)
BIOS level 2 BIOS level 3 Item Default value
Admin Password Admin Password Enter the old password Not Set
Enter the new password Not applicable
Confirm new password Not applicable
System Password System Password Enter the old password Not Set
Enter the new password Not applicable
Confirm new password Not applicable
Accessing and updating BIOS 89