Users Guide

Bluetooth configuration
In the Search box, type Settings and open the Settings window. Select Devices, and then select Bluetooth from the menu
on the left panel to configure the network.
WWAN (5815) network configuration
NOTE: Ensure that the micro-SIM card is already activated by your service provider before using it in the Edge Gateway.
For more information, see activate your mobile broadband service.
Follow these steps after installing the micro-SIM card:
1. In the Search box, type Settings and open the Settings window.
2. Select Network & Internet.
3. Locate the WWAN connection in the Wi-Fi section and select the entry to connect and disconnect from the WWAN adapter.
Ethernet configuration
1. In the Search box, type Settings and open the Settings window.
2. Select Network & Internet.
3. Select Ethernet, then Change adapter options to change Ethernet settings such as the duplex configuration.
Ubuntu Core 16
Overview
Ubuntu Core 16 is a Linux OS distribution that is an entirely new mechanism for managing IOT systems and its applications. For
more information about Ubuntu Core 16 OS, see
● www.ubuntu.com/cloud/snappy
● www.ubuntu.com/internet-of-things
Prerequisites for setting up Ubuntu Core 16
Infrastructure
An active connection to the internet is needed to update the Ubuntu Core 16 operating system as well as applications (snaps).
Prior knowledge
● Ensure the personnel setting up Ubuntu Core 16 operating system has prior knowledge of the following:
○ Unix\Linux commands
○ Serial communication protocol
○ SSH terminal emulators (for example, PuTTY)
○ Network settings (for example, proxy URL)
Boot up and log in – Remote system configuration
1. Connect a network cable from Ethernet port one on the Edge Gateway to a DHCP-enabled network or router that provides
IP addresses.
2. In your network's DHCP server, use the command dhcp-lease-list to obtain the IP address associated with the Edge
Gateway's MAC address.
50
Setting up the operating system